Communicate with Supplier? Supplier
liu yong Mr. liu yong
What can I do for you?
Contact Supplier
 Tel:86-0738-6827331
Home > Industry Information > How to maintain the noodle packaging machine?
Online Service
liu yong

Mr. liu yong

Leave a message
Contact Now

How to maintain the noodle packaging machine?

1. Regularly check the machine parts and stop once a month to check whether the worm gear, the worm, the bolts on the light slider, the bearings and other activities can turn the sensitive and worn condition, and find that the defects should be repaired in time, and should not be used barely.

2. The machine should be placed in a dry and clean indoor environment. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.

3. After the machine is finished or stopped, the rotating drum should be taken out to stop cleaning and brush the remaining powder in the bucket, and then it is ready to be prepared for the next operation.

4. When the roller is moving before and after the attack, adjust the screw of the front bearing to the proper position. If the gear shaft is turbulent, please adjust the screw behind the bearing frame to the proper position, adjust the clearance so that the bearing does not sound, and turn the pulley. It is appropriate to tighten tightly. If it is too tight or too loose, it may cause damage to the machine.

5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.

The noodle packaging machine needs maintenance and maintenance. During the operation of the noodle packaging machine, the operator should use the machine correctly and clean it regularly.

Previous: The advantages of the production of noodle packaging machine

Related Products List